SCANIA VCI1 comes with SD2 and SP2 for Scania 4 and 3 series

SCANIA VCI1 Diagnostic Interface used for the Scania trucks and buses 4 and 3 series that range from 1995 to 2004.

It comes with SD2 (Scania Diagnos software) and SP2 (Scania Programmer software) for Scania 4 and 3 series (buses, trucks). It allows the user to perform full diagnostics and vehicle programming.

Features:

1. PC with Windows XP and RS 232 required in laptop.
2. USB to RS 232 (proliftic) converter can be used (tested, working)

List of supported systems:
APS - Air processingsystem
BWS - Body work system
BCS - Bus chassis system
EBS - Brake management system
EEC - Exhaust emission control system
EMS - Engine management system
COO - Coordinator
ICL - Instrument cluster
TCO - Tachograph system
ATA, WTA, CTS and AUS - Auxiliary heater system, Clock timer system, Radio
OPC and RET - Gearbox management system
SMS - Suspension management system
RTI - Road traffic information
TPM - Tyre Pressure Monitoring
LDW - Lane Departure Warning

To work with SCANIA models P, R, T, K, N that after 2004, you need to use SCANIA VCI2.

This Version CAT Caterpillar ET Diagnostic AdapterDisplay Status of All Parameters

CAT Caterpillar ET Diagnostic Adapter retrieve engine totals for fuel used, miles traveled, and hours Operated. CAT Caterpillar ET Diagnostic Adapter display status of all parameters, such as engine speed, Throttle position, timing advance, fuel flow, etc.

The PC-based service tools from Caterpillar provide the capability to access Electronic Control Modules (ECMs) from a personal computer. Many job-critical tasks can be performed with an electronic service tool. The user can display the status of a group of parameters (temperatures, pressures, etc.) simultaneously, view active and clear logged diagnostics, display the current configuration of an ECM and much more. The service tool works with a communication adapter to allow connection to an ECM. A graphical interface makes this software quick to learn and easy to use. A separate pull-down menu for each function enhances the “ease of use.” The version and identification of the ECM is automatically retrieved and is displayed on a summary screen when the program is started. Diagnostic tests and calibrations can also be performed.

Languages currently supported: Danish, English, French, German, Italian, Japanese, Portuguese and Spanish.

CAT ET 2 function:

1. Display "Logged Event Codes" to show engine over speeds, High temperatures, fuel consumption, etc.
2. View ECM’s current configuration and change user settings
3. Perform diagnostic tests and calibrations, and calibrate
4. Electro-mechanical and electro-hydraulic components
5. Context sensitive help leads operator through every task Cat ET can perform
6. Data Logger and Data Log Viewer allows recording of ECM signals for delayed troubleshooting capability.

Functionalities Shows all operating conditions that cause high repair costs such as:
Over speeds, high temperatures, fuel consumption, transmission shift counts. This can provide awareness to change operator

Cat "ET Trainer" is now included in ET Program. It allows Users to train and practice using Cat ET without a Communications adapter or Electronic Control Module (ECM).This is a free feature of Cat ET.

Specification:

1. ECM Summary screen lists every control module on equipment
2.Being tested and gives information on these modules.
3. Fast hookup and real time display of systems status. Displays ,readings such as rpm, boost, pressures, temperatures, etc. for Easy troubleshooting.
4. Identifies faulty sensors, harness connectors, and system parameters which are out of specification. Allows customers
5. To help dealer identify problems without visiting machine.
6. Identifies intermittent sensors and wiring problems during Machine operation and keeps a record of each one. Shows when problem occurred and how often it happened.
7. Added information to allow customer to assist dealer in diagnosing and repairing problems. (Troubleshooting Help is not built in with in the program, you will still need go back to books in order to follow a repair description and steps in each Fault Code display within the program).English and metric units of measure integrated help file to easy learn the "How To" around the software.

Software:

(1) Designed to run with Microsoft Windows XP
(2) Ready to use, just install software program onto PC using provided CD

Package list:

1 x CAT Adapter II main unit
1 x USB cables
1 x Diagnostic cable
1 x Software CD (diagnostic program Caterpillar ET 2010)

The latest PC-based Diagnostic System Tester for DENSO

DENSO DST-PC is the latest PC-based Diagnostic System Tester for DENSO that communicates with multiple vehicle ECU's by conventional serial communication as well as the modern CAN bus protocol.

Diagnostic System Tester's Unique Design
With new features like Automatic Vehicle Detection, Data Recording and Trouble Shooting Guidance, the DST-PC platform offers all of the diagnostic information needed for advanced trouble shooting. The Diagnostic System Tester’s unique design makes it simple to expand and update to support new management systems and vehicles.
Diagnostic System Tester - Contents
The DENSO Diagnostic System Tester consists of diagnostic software exclusively developed for the DST-PC platform, to be installed on a PC or laptop (not included), a vehicle interface module and the necessary cables.

Supported Protocols and APIs: CAN (CANBUS), ISO9141-2, ISO11898 (CAN), ISO15765, J1939, J1979, J2284, J2534, KWP2000 (ISO14230).

Diagnostic System Tester’s High-Tech Features:

(1) Clear Trouble Codes
(2) Data Recording
(3) Extensive Data Monitoring and simultaneous Active Tests
(4) Active Tests
(5) Manage Projects
(6) Injector Compensation
(7) Vehicle ECU Memory Reset
(8) Injection Quantity Correction
(9) MAF Correction
(10) Fuel Pump Learning Value Clearing

Package List:

1 x DENSO DST-PC Communication Interface
1 x OBD2 female to DENSO 16pin cable
1 x USB to DB-9 male cable. ( DG-PY-24V-CABLE)
1 x OBDII to DB-9 female cable. ( DG-PY-OBDII-CABLE)
1 x DVD

NEXIQ 125032 Multi Brand Truck Diesel Diagnostic Tool

NEXIQ 125032 Multi Brand Truck Diesel Diagnostic Tool is a pc basic multi brand truck diagnostic interface. It compatible with multiple truck software including Allison, Bendix 6.3.8.0, Detroit Diesel DDDL 7.05, Detroit Diesel DDCT, Detroit Diesel Calibration Tool, Eaton Service Ranger 3.2, International DLB, International ICAP, IPTS, NETS, IPC, International Master Diagnostic, Meritor and Wabco Diagnostics, Cummins Insite 7.5, Hino 2.0.3, Caterpillar 2.0.1.0,Perkins EST 2010B, V Macks 2.6.12, V Macks Dealer Pro and Volvo VCADS 2.35.10 software.
Feature:
1. Compatible with applications that diagnose engines, transmissions, ABS, instrument panels and more.
2. Reduce reprogramming times with direct USB connection
3. Mixed fleet capabilities with broad protocol support
4. Quick access to vehicle data for maintenance or management reports
5. Quickly attaches to vehicle's diagnostic connector.
6. Easy portability increases flexibility, May be used with desktop PC or laptop.
Compatible software:
- Allison (Included!)
- Bendix 6.3.8.0 (Included!)
- Detroit Diesel DDDL 7.05 ((Included!)
- Detroit Diesel DDCT (Included!)
- Detroit Diesel Calibration Tool (Included!)
- Eaton Service Ranger 3.2 (Included!)
- International DLB (Included!)
- International ICAP, IPTS, NETS, IPC (Included!)
- International Master Diagnostic (Incluided!)
- Meritor and Wabco Diagnostics (Included!)
- Cummins Insite 7.5 (Included!)
- Hino 2.0.3. (Included!)
- Caterpillar 2.0.1.0 (Included!)
- Perkins EST 2010B (Included!)
- V Macks 2.6.12 (Included!)
- V Macks Dealer Pro (Included!)
- Volvo VCADS 2.35.10 (Included!)
Specification:
RP1210A, RP1210B, and J2534 API support
USB vehicle-to-PC connectivity
Protocol coverage for automotive to heavy duty vehicles:
CAN - J1939/CAN125/CAN250/CAN500/CAN1000
2nd CAN - J1939/CAN125/CAN250/CAN500/CAN1000
Automatic bit rate detection for both CAN channels
J1587/J1708
J1850
ISO 15765 (Diagnostic CAN)
ISO 14230 (KWP2000 over ISO9141)
J2534
ALDL
ATEC 160 (160 baud)
Support windows xp and windows 7
Package list:
1 x NEXIQ 125032 USB-Link module PN:125032
1 x 6PIN deutsch and 9pin deustch”Y” PN:405048 cable
1 x 16PIN J1962(OBD2) PN:448013 cable
1 x 16PIN J1962(Heavy Duty)-j1708 PN:444009 cable
1 x 8PIN Volvo/Marck PN:88890027 cable
1 x 14PIN Volvo construction equipment PN:88890034 Cable
1 x USB cable PN:403098
1 x CDs
1 x Heavy duty plastic case

A PC-based software application Cummins INSITE 5 V7.5

Cummins INSITE 5 V7.5 is a PC-based software application that provides quick and easy access to your engine's electronic performance information, which enables faster service turn around times. INSITE helps to ensure accurate procedures and diagnosis and limit downtime, while increasing productivity and profits.

Cummins INSITE 5 V7.5 software supplies engine information quickly, getting the inside details you need. No matter what kind of equipment you run, Cummins INSITE 5 is the one support product to have in your virtual tool box to fit every Cummins electronic engine.

Language: Multi-language option

Function:

1.Trip and vehicle information
2.Parameter and feature adjustment
3.Accurate problem diagnosis
4.Complete wiring diagram sand sensor location maps
5.Step-by-step trouble-shooting information
6.Fault tree information
7.Fault code and symptom-based diagnostics
8.Engine diagnostic tests
9.Tools to create templates for a group of vehicles
10.Fleet management/driver reward programs
11.Audit trail information
12.Enhanced ECM security

Cummins INSITE 5 V7.5 is offered in four functional levels: Basic, LITE, RSGR and Pro, ranging from a read only access level to full-function access and capability for the service professional. TOP Authority for FREE.

Specification:

1.Supports SAE J1708/J1587 and J1939/CAN data links
2.Supports USB full speed port at up to 2M baud rate
3.Supports RS-232 PC/PDA serial port at up to 115.2k baud rate
4.Is fully compliant with TMC's RP1210 standard
5.Small enough to fit in pocket
6.Aluminum housing provides ruggedness
7.Derives 8 V to 50 V DC power from vehicle
8.Includes advanced processor for maximum speed and performance
9.Internal Flash memory allows firmware upgradeability
10.Includes 5 LED to indicate power and USB, RS-232, J1708/J1587, and J1939/CAN communications
11.Rated for -40° to +85° C operating temperature
12.INLINE 5 meets Cummins in-cab environmental test requirements

Package list:

1 x INLINE 5 data link adapter (P/N 3165033)
1 x USB 2 meter cable (P/N 4918419)
1 x DB25F/9-pin data link cable (P/N 3165159)
1 x DB25F/6-pin data link cable (P/N 3165160)
1 x OBDII 16pin cable
1 x INLINE 5 software CD (P/N 4918417)
1 x Carry Case

CAT Caterpillar Communication Adapter 3 317 7485 Diagnostic Interface

CAT Caterpillar Communication Adapter 3 317-7485 Diagnostic Interface is the latest generation of the CAT Communication Adapter group, it replaces the CAT Communication Adapter II. This is the only recommended communication device for CAT, and the only DataLink device that will allow you to properly communicate with a CAT engine on dual DataLinks.

The PC-based service tools from Caterpillar provide the capability to access Electronic Control Modules (ECMs) from a personal computer. Many job-critical tasks can be performed with an electronic service tool. The user can display the status of a group of parameters (temperatures, pressures, etc.) simultaneously, view active and clear logged diagnostics, display the current configuration of an ECM and much more. The service tool works with a communication adapter to allow connection to an ECM. A graphical interface makes this software quick to learn and easy to use. A separate pull-down menu for each function enhances the “ease of use.” The version and identification of the ECM is automatically retrieved and is displayed on a summary screen when the program is started. Diagnostic tests and calibrations can also be performed.

Languages currently supported: Danish, English, French, German, Italian, Japanese, Portuguese and Spanish. 

CAT ET function:

1.Display "Logged Event Codes" to show engine over speeds, High temperatures, fuel consumption, etc.
2.View ECM’s current configuration and change user settings
3.Perform diagnostic tests and calibrations, and calibrate
4.Electro-mechanical and electro-hydraulic components
5.Context sensitive help leads operator through every task Cat ET can perform
6.Data Logger and Data Log Viewer allows recording of ECM signals for delayed troubleshooting capability.

Functionalities Shows all operating conditions that cause high repair costs such as: 
Over speeds, high temperatures, fuel consumption, transmission shift counts. This can provide awareness to change operator

Cat "ET Trainer" is now included in ET Program. It allows Users to train and practice using Cat ET without a Communications adapter or Electronic Control Module (ECM).This is a free feature of Cat ET.

Specification: 

1. ECM Summary screen lists every control module on equipment
2. Being tested and gives information on these modules.
3. Fast hookup and real time display of systems status. Displays ,readings such as rpm, boost, pressures, temperatures, etc. for Easy troubleshooting.
4. Identifies faulty sensors, harness connectors, and system parameters which are out of specification. Allows customers
5. To help dealer identify problems without visiting machine.
6. Identifies intermittent sensors and wiring problems during Machine operation and keeps a record of each one. Shows when problem occurred and how often it happened.
7. Added information to allow customer to assist dealer in diagnosing and repairing problems. (Troubleshooting Help is not built in with in the program, you will still need go back to books in order to follow a repair description and steps in each Fault Code display within the program).English and metric units of measure integrated help file to easy learn the "How To" around the software.

Software:
Designed to run with Microsoft Windows XP
Ready to use, just install software program onto PC using provided CD

John Deere Diagnostic Kit with Service ADVISOR 4.0

John Deere Diagnostic Kit with Service ADVISOR 4.0 EDL (Electronic Data Link) is a dealer diagnostic adapter for construction equipment, agriculture and forestry engines of John Deere.

Version: V4.0 (2012)

John Deere Diagnostic kit includes software John Deere Service Advisor 4.0 Agriculture, Construction and Forestry version.

John Deere Service Advisor 4.0 Agriculture workshop service manual, repair manual, electrical wiring diagram, hydraulic diagram, diagnostic, assembly and disassembly engine, transmission.

John Deere Service Advisor 4.0 workshop manual, repair manual, dealer technical assistance, diagnostics, connection readings, calibrations, interactive tests, specification, tools.

John Deere AG Management Solutions, Attachments, Backhoes, Combines and Headers, Cotton Harvestings, Excavators, ForkLifts, Hay and Forages, MAte Hand Cut and Shredderses, Plantings and Seedings, Skid Steers, Sprayers, Sugar Cane Harvesters, Tillages, Tractors, Worksite Pro Attachments.
John Deere Service Advisor 4.0 CF (Construction and Forestry), workshop service manual, repair manual, diagnostic, electrical wiring diagram, hydraulic diagram John Deere.
John Deere Service Advisor 4.0 CF (Construction and Forestry) dealer technical assistance, diagnostics, connection readings, calibrations, interactive tests, specification, tools, assemble and disassemble presented all models John Deere Construction Equipment and some models Hitachi, Euclid, Bell and Timber jack.

Package list:

1 pc x Electronic Data Link v2
1 pc x 15 'USB cable
1 pc x 6-pin + 9-pin Deutsch cable
1 pc x Jon Deere Service advisor 4.0 [2012] AG (Agriculture) and CF 4.0 (Construction and Forestry)DVD